Sabre 1848HV Manual del operador descargar pdf (Pagina 11)

Assembly - Page 7

ASSEMBLY

Check Machine Safety System

Perform safety system check to make sure the

electronic safety interlock circuit is functioning properly.

Perform all six Tests. (See Testing Safety System in the

Operating section)

Checking Tire Pressure

1. Check tires for damage.

2. Check tire pressure with an accurate gauge.

3. Add or remove air, if necessary:

CAUTION: Explosive separation of a tire and

rim parts can cause serious injury or death:

- Do not attempt to mount a tire without the

proper equipment and experience to perform

the job.

- Always maintain the correct tire pressure.

Do not inflate the tires above the

recommended pressure. Never weld or heat a

wheel and tire assembly. The heat can cause

an increase in air pressure resulting in a tire

explosion. Welding can structurally weaken or

deform the wheel.

- When inflating tires, use a clip-on chuck and

extension hose long enough to allow you to

stand to one side and NOT in front of or over

the tire assembly.

- Check tires for low pressure, cuts, bubbles,

damaged rims or missing lug bolts and nuts.

Tire Size Pressure-kPa (psi)

Front: 16 x 6.5 97 kPa (14 psi)

Rear: 23 x 9.5 83 kPa (12 psi)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 99 100

Sin comentarios

Sabre 1848HV Manual del operador Pagina 11